Tips to Remove Wrinkles From a Pool Liner

There is nothing quite like the soft and slick feeling of a pool liner on your feet while you swim. However, sometimes those liners can become wrinkled. If that happens, what are you to do?

Dealing with pool liner wrinkles is just part of owning a pool with a liner, so you need to be prepared to deal with them when they happen. There are many ways you can remove wrinkles from a pool liner that are relatively easy for you to do yourself, although it will take a little bit of work.

Tips to Remove Liner Wrinkles

If you have noticed wrinkles in the liner of your pool, then the time has come to act. Don’t allow those wrinkles to sit there for too long. The longer they are allowed to exist, the tougher it will be to get rid of them. Try the following tips to remove wrinkles from a pool liner so your feet don’t have to touch those ugly wrinkles whenever you go for a swim.

Tip 1 – Fill Your Pool

Sometimes wrinkles can form after the pool has sat for an extended period of time. If your pool water is low or you need to replace the water after it has sat there for a while, then try filling your pool with fresh water and slowly working the wrinkles out as you fill the pool.

Tip 2 – Start Walking

One of the easiest ways you can get rid of at least some of those wrinkles is by putting on some soft soled shoes and walking across the wrinkles gently stretching then from one side or another as you go. This will often take care of most minor wrinkles without you having to do anything else, but some wrinkles may be tougher to remove.

Tip 3 – Grab a Plunger

Believe it or not, a toilet plunger is a great tool for pulling out those wrinkles in your pool. Place the plunger on either side of the wrinkle and then plunge. This will pull the liner each way removing that wrinkle once and for all. Just make sure you use a clean, unused plunger for the task. After all, who wants to swim in water that has had your nasty toilet plunger in it?

Tip 4 – Warm up the Pool

Liners often develop wrinkles in colder water. These colder temperatures cause the liner to harden forcing it to wrinkle. Before you try anything, you may want to consider trying to heat the water up to 92 degrees Fahrenheit so the liner softens. You can then work out the wrinkles with a pool brush, your feet and even the plunger solution we talked about above.

Tip 5 – Drain the Water

Sometimes, the wrinkles may be so bad that you have no choice but to completely drain the pool. Once all the water is gone, you can then take a shop vac and use it to suck out those wrinkles one by one. When you do this, make sure that the liner remains wet at all times and be sure you vacuum between the frame and the liner instead of directly on the liner as the shop vac could damage the liner.

Tip 6 – Check Your Landscape

Double check your landscape to see if any trees, bushes or shrubs are directing water where it shouldn’t be or even extending into your pool area. If you have noticed any shifting of the ground, you will need to take the proper steps to shore up the ground so it doesn’t continue to shift. Once this is done, you can get rid of those wrinkles and they shouldn’t return.

Tip 7 – Watch for Leaks

One of the most dangerous causes of wrinkles can be small water leaks. These leaks allow water to get underneath the liner forcing it up in places. When this happens, you will need to locate the leak quickly and you may even have to drain the pool to patch it properly before you can start pulling out those unsightly wrinkles.

Tip 8 – Blow Out the Liner

If all else fails, you can try draining your pool and then blowing out the liner itself. Using a shop vac in reverse, place the hose between the liner and the frame and turn it on. This will push air between the liner and frame and push those wrinkles right out of the liner. Once they have come out, reverse the suction again and pull out the excess air that you have pushed under your liner.

Tip 9 – Call in the Pros

No matter how much or how hard you work on your pool liner, sometimes you have to call in the professionals. Draining your pool regularly to try and fix wrinkles can put the structure of your pool in danger, not to mention cost you an arm and a leg in water bills. If you have tried everything and you still have wrinkles in your pool, then you may want to call for backup.

Tip 10 – Replace the Liner

I have to admit, sometimes you simply won’t be able to get those wrinkles out of your pool liner. Sometimes they are just there to stay and no amount of work will make any difference. If you have reached that point, then the time has come for you to replace that liner with a new one. Just make sure the new one is installed correctly so you don’t notice wrinkles forming in it soon after it has been installed.

Conclusion

Dealing with wrinkles is just part of owning a pool with a liner. These ten tips should help you remove those unsightly wrinkles so your pools liner is as smooth as it was the day it was installed. Remember, pool liner wrinkles look bad and feel even worse on your feet, and the longer they stay there the harder they will be to remove. So make sure you act fast.

By following these tips, you should be able to get rid of those wrinkles with just a little bit of hard work on your part. If you do run into problems, don’t be afraid to call in a professional to help you. In most cases, if you follow these tips you should be able to get rid of the wrinkles in your liner. Once they are gone, you can refill your pool and go back to enjoying a nice long swim to cool off in the warm weather.

Happy Swimming!

Font: https://www.swimuniversity.com/pool-liner-wrinkles/

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

4 × 5 =